InspectAPedia TM

Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice
InspectAPedia
Home		 | Air
Conditioning		 | Electrical | Environment | Exteriors | Heating | Home
Inspection		 | Insulate
Ventilate		 | Interiors | Mold
Inspect/Test		 | Plumbing
Water
Septic		 | Roofing | Structure | Contact Us
New Directory of Professionals to Inspect or Test a Building New

Auto Web Page Forward to How to Inspect Residential Air Conditioning Systems - Inspection for Defects in A/C compressors, air handlers, duct work, and controls

This is the home page for Air Conditioning Systems Inspection - it has been relocated to http://www.inspect-ny.com/aircond/aircond1123.htm and you will be auto-forwarded there. If you do not see the page content in a few seconds use this link to go to the page you seek.


InspectAPedia TM Home & Site Map
Air Conditioning
InspectAPedia Bookstore
Electrical
Environment
Exteriors
Heating
Home Inspection
Insulate Ventilate
Interiors
Mold Inspect/Test
Plumbing Water Septic
Roofing
Structure
More Information
Accuracy & Bias Pledge
Contact Us

goto InspectAPedia.com - authoritative, in-depth Building Diagnostic and Repair Information for building buyers, owners, inspectorsInspectAPedia TM Home & Site Map - Building Inspection, Diagnosis, & Repair, Environmental Inspection & Testing - Research Website

GO TO the MOLD and INDOOR ENVIRONMENT INFORMATION CENTER for in-depth advice on avoiding testing for or cleaning up mold and other indoor environmental hazards, odors, gases, contaminantsThe Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems

GO TO our PRE PURCHASE BUILDING INSPECTION SERVICES: Authoritative information for home buyers and home owners is included with your inspection.Home Inspection Construction Consulting Services & advice for home buyers

GO TO MOLD TEST KITS: This expert-recommended mold test kit is cheap and yet top performing *IF* you use a competent analysis laboratory!Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab

GO TO IAQ/MOLD-TEST LAB SERVICES: Mold, Pollen, indoor air quality, field and laboratory services by an expert.Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.

CONTACT Daniel Friedman - Dan is a senior ASHI home inspector, nationally recognized expert on building inspection, building failures, and sick building investigationContact Daniel Friedman for website content suggestions or for fee-paid consulting

Google
 

05/13/2006 Created 11/24/95 - Source File: www.inspect-ny.com/aircond1.htm Web page design & content produced and © Copyright 2008-2000 by Dan Friedman All Rights Reserved