InspectAPedia ^TM

Aluminum Wire: Copper to Aluminum Splice Deterioration Process and Consequence Enter your search terms Submit search form   Search This Website - InspectAPedia.com

Aluminum wire failure mechanisms Why twist-on connectors overheat and lead to failures when used for copper to aluminum pigtailing

This page continues the explanation of why twist-on connectors overheat and lead to failures when used for copper to aluminum pigtailing as an attempt at aluminum wiring repair. The observation explained here is that with this type of aluminum to copper wire splice, resistance increases between the copper and aluminum wires, leading to overheating of the connection and the twist-on the connector. This is Aluminum Wiring Repair Procedure - Page 8 Color photos and descriptive captions from CPSC Meeting 9/28/95. In this document aluminum wire twist-on connector failures and repair procedures are described, including aluminum wire repair methods which work and methods which do not work and are unsafe. Color photos of aluminum wire repair procedures, and photos of failed connectors are included. This document describes hazards with existing products, explains the aluminum wiring failure mechanism, and reviews recommended retrofit procedures including use of readily-available materials. This information was presented to the US Consumer Product Safety Commission by Dr. J. Aronstein, 9/28/95. The minutes of that meeting were obtained under the Freedom of Information Act and posted by Daniel Friedman January 1996.
Use your browser's Back button to return to the previous page

Click on the thumbnail sketches below to see each full-sized illustration.
Page Forward -- Page Back
Go Back to Presentation Contents -- Go to The Aluminum Wire Information Website.

25. As the aluminum-wired twist-on splices age, the wire-to-wire contact increases in resistance and may finally open altogether. The many wire-to-spring contacts also deteriorate (increase resistance) and some may also open completely, as shown in this equivalent circuit.




26. The deterioration process is observed experimentally as a slow but progressive increase in resistance, as the various current paths within the splice degrade. There are less parallel paths active through the spring, and the result can be a red-hot spring when current flows.




27. That is exactly what has happened here. All of the current is passing through only a few segments of the spring and those parts of the spring become red hot.

Text from attachment occurs here:

That the tests of UL486C are insufficient can be understood by considering the following table. [Table is on next page.]
Page Forward -- Page Back
Go Back to Presentation Conclusion -- Go to The Aluminum Wire Information Website.

More Information on Aluminum Wiring Hazards and Other Building Diagnostic Inspections and Repairs

• The Aluminum Wiring Information Website Aluminum Wiring Hazards and Repairs: in-depth info, photos, documents. Main Page.
• The Aluminum Electrical Wiring Hazard Explained (in the document you are presently viewing)
• How to Reduce the Risk in Buildings with Aluminum Electrical Wiring - Overview of Acceptable Repair Practices (in the document you are presently viewing)
• Aluminum Electrical Repair Method Details - "How to" details, how to identify, COPALUM repair, alternative repairs, history, products, research, source of special AMP TYCO COPALUM connectors & COPALUM Electricians (in the document you are presently viewing)
• COPALUM Electricians: Sources of TYCO COPALUM -Certified/Trained Aluminum Wire Repair Services (in the document you are presently viewing)
• Other Products, Ideal 65 Purple Twister (not recommended), & other Aluminum Wire Products/Articles (in the document you are presently viewing)
• The Aluminum Wiring Bibliography: extensive resources on Aluminum Wiring
• Aluminum Wire Failure Reports & Photos: Real life aluminum wiring field failure reports
• Reducing the Fire Hazards in Aluminum-Wired Homes, Jess Aronstein, Ph.D., This document answers most technical questions about the hazards and remedies of aluminum electrical wiring. Some of the sections of this very thorough document are listed below:
• Fire Hazards With Aluminum to Copper Twist-on Connectors & Acceptable Aluminum Wiring Repair Practices Color Photos, Current Issues. 9/28/95 CPSC Meeting Minutes
• "Is YOUR Aluminum Wiring Safe?" article discussing safety claims made by some people without looking at the wiring, J. Aronstein, 11/21/95
• "Repairing Aluminum Wiring," U.S. Consumer Product Safety Commission Publication CPSC#516 available online
• * Safety Hazards and Safe Inspection Procedures for Electrical and Home Inspectors at Residential Electric Panels
• Electrical Panels, How to Inspect in Buildings, safety for electrical inspectors, electrical panel, fusing, wiring defects, defective products. Inspection Class Presentation
• Electrical System & Wiring Hazard Inspection, Detection, Cause, Remedy, Prevention - Main Electrical Page
• Directory of Home Inspectors accessible via Internet

InspectAPedia ^TM Home & Site Map - Building Inspection, Diagnosis, & Repair, Environmental Inspection & Testing - Research Website

Home Inspection Construction Consulting Services & advice for home buyers

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search This Website - InspectAPedia.com