InspectAPedia ^TM

OTHER FPE DEFECTS - Additional Reasons to Replace Federal Pacific Electric FPE Stab Lok electrical panels FPEaPedia © Enter your search terms Submit search form   Search This Website - InspectAPedia.com

• Bus design and breaker-bus connection design problems provide additional reasons to replace FPE Stab-Lok and Federal NOARC electrical panels besides failure-to-trip
• Photo guide to Federal NOARC load center identification

We recommend against simply buying FPE replacement circuit breakers. The entire electrical panel or at least the entire bus assembly and breakers should be replaced using a new, different electrical product. For more information see FPE REPLACEMENT PANELS and FPE REPLACEMENT BREAKERS. This page assists in identifying Federal Pacific Electric Stab-Lok electrical panels and circuit breakers. More FPE information is in the links at page left.

This document describes how to identify Federal Pacific Stab-Lok Electric Panels in buildings. It is information for building inspectors, home buyers, home owners, electricians exploring the background of possible hazards associated with Federal Pacific Electric Stab-lok circuit breakers and service panels. © Copyright 2008 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

OTHER DEFECTS - Federal Pacific Electric Equipment issues extend beyond basic design of the Stab Lok Circuit Breaker

But it's more complicated than that. The company actually changed the design from time to time (without necessarily telling anyone). On the other hand, No one has provided any technical or even anecdotal data suggesting that any of these changes corrected basic design flaws. In addition, there was the problem of equipment UL-listing label swapping and therefore mislabeling individual pieces of equipment, therefore incorrectly stating the use to which individual pieces of equipment could be applied.

FPE USA stopped making equipment quite a while ago, but Stab-Lok (TM) panels and circuit breakers continued to be produced in Canada, under the name Federal Pioneer, a Canadian "FPE" company which was later bought by Schneider Electric, also in Canada.

Federal Pioneer Stab-Lok circuit breakers and panels continue to be available even still as new today. Some of my Canadian contacts claim that the Canadian product was better than the U.S.-made version but my own first-hand view of some of it in the home of a Canadian Home inspector was that it was just as bad. (The circuit breakers had to be held into the panel using adhesive tape!)

Several years ago I called Schneider Electric and was able to speak with a Schneider engineer about this product. I asked if they had changed the design to fix any of the inherent problems with the product series over the U.S. version. I was promised an answer to this question - the engineer was quite polite. But in follow-up calls no one at the company wanted to provide any information about this product.

If a manufacturer cannot, or will not provide their supporting test or other data for a product I'm forced to err on the safe side by refusing to endorse it. "Trust me" just doesn't cut it where electrical safety is concerned.

Use links just below or at the left of each page to navigate this document or to view other topics at this website. Green links at page left show where you are in our document or website.

FPE Stab Lok IDENTIFICATION
FPE STAB-LOK PANEL COVERS
FEDERAL NOARK PANELS
FEDERAL ELECTRIC PANELS
FEDERAL PIONEER PANELS
FPE PANEL DOOR LABELS
FPE TOGGLE SWITCH
FPE BREAKER LABELS
HOW TO ID FPE IF NO LABELS
FPE PANEL BUS DESIGNS
FPE PANEL AGE MATTERS?
FPE HISTORIC DATES
OTHER FPE DEFECTS

More Information about FPE Federal Pacific Stab Lok Panels and Circuit Breakers - Reference List

• The Federal Pacific Stab-Lok Electric Panel Hazard Website Safety Information for Consumers. 1983
• Home Inspection Reporting Language for FPE Stab-Lok electric panels and circuit breakers
• Schneider Canada Federal Pioneer circuit breaker recall
• How to Identify Federal Pacific Electric Panels Stab Lok Breakers & History of the Federal Pacific Electric Stab Lok Hazard
• FPE FIRES: Failures continue: FPE breaker fails, results in fires: field reports
• Replacement Electric Panels: Federal Pacific Electric Panel Replacements two cost and method options for FPE panel replacement.
• Federal Pacific Electric Fires Waiting to Happen, Debate Waiting to Be Ended, detailed article
• 1983 CPSC Investigation of FPE Circuit Breakers Safety Information for Consumers
• 1982 Reliance Electric Co. SEC Quarterly Report: Note C. reports litigation between Reliance and UV Liquidating Trust and contends that "... improper and deceptive practices were employed for many years to secure UL listings for Federal Pacific's circuit protective products..."
• 1980 Reliance Electric Co. Press Release: improper practices improper practices used to obtain UL Listing for most of FPE's circuit breakers and notes testing which indicates "possible defects." 1980, Reliance Electric Co.
• 1980 FPE - Exxon Buys A Scandal Along With A Company improper practices improper practices used to obtain UL Listing for most of FPE's circuit breakers and notes testing which indicates "possible defects." 1980, Reliance Electric Co.
• FAQ: Website Credibility

InspectAPedia ^TM Home & Site Map - Building Inspection, Diagnosis, & Repair, Environmental Inspection & Testing - Research Website

Home Inspection Construction Consulting Services & advice for home buyers

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search This Website - InspectAPedia.com