InspectAPedia ^TM

InspectAPedia ^TM Home & Site Map
Air Conditioning
InspectAPedia Bookstore
Electrical
Environment
Exteriors
Heating
Home Inspection
Insulate Ventilate
Interiors
Mold Inspect/Test
Plumbing
Water
Septic
Roofing
Structure
Accuracy & Bias Pledge
Contact Us

Properties of Rock Wool, Mineral Wool, Slag Wool Building Insulation Materials MoldAPedia © Enter your search terms Submit search form   Search This Website - InspectAPedia.com

• Characteristics of mineral wool, rock wool, slag wool used for building insulation
• Photo guide to identification of different building insulation materials
• Properties of different building insulation products

This page illustrates and describes mineral wool insulation materials also called rock wool and slag wool. I've added these examples because of frequent questions about these materials. This document assists building buyers, owners or inspectors who need to identify various insulation materials in buildings by simple visual inspection.

We provide photographs and descriptive text of various types of mineral wool insulation and describe its properties, how it is made, health and maintenance concerns, and its insulating values.

© Copyright 2008 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

MINERAL WOOL/"ROCK WOOL" - Mineral wool or "rock wool" or "slag wool" building insulation is not asbestos

Mineral wool insulation, developed in the 1850's, patented in 1875 in the U.S. and this material, also called rock wool insulation remained in popular use in the U.S. up to the 1950's, and is still in use today (2008) in some new construction, in manufactured housing, and in special applications such as the insulation of low-slope roofed cathedral ceilings and scissors-truss roofs.

What is Rock Wool Insulation?

Just to add to the confusion about what to call this insulation, the insulation industry calls a range of products "mineral wool" and includes under that name: fiberglass, slag wool, and rock wool.

Rock wool is a naturally-occurring mineral fiber that looks like chopped white cottony material. (It may have originally been formed by wind blowing across streams of lava from erupting volcanoes.)

Rockwool is currently produced in the U.S. in Indiana, North Carolina, Texas, and Washington State.

As you can see in our photo at left, mineral wool insulation is not necessarily stark white. In an attic rockwool is typically about 1 1/2 pounds per cubic foot in density. In building walls this material is installed in more dense sprays of four to five pounds of material per cubic foot.

At roughly 1.2 pounds per cubic foot, rockwool or mineral wool has an R-value of R-30 (heavier than fiberglass).

Rock wool as a building insulating material remains in active use in the U.S. and has been reported in application in the Southern U.S. in the mid 1980's and continuing at least into the mid 1990's. [Home Energy Magazine Online, July/August 1997]

Modern rock wool is a manufactured product comprised of a mix of limestone, slag waste from steel blast furnaces, and basalt or diabase. Rockwool is about 3/4 steel slag and 25% basalt rock. Some rockwool producers use nearly pure recycled steel slag.

Similar to the production of fiberglass, rock wool is manufactured by heating these materials and spinning them into fine fibers that are then often applied in a sprayed-on chopped fiber form.

Airborne particle characteristics of Rock Wool Insulation

Because it is more dense (about 1.2 pounds /cubic foot) than some other insulating materials such as fiberglass (about 1/2 pound per cubic foot), some writers point out that rockwool is less likely to become airborne. This is a confusing view unless supported by more specific data. Most air movement in buildings is upwards and outwards through the building attic. We have identified some conditions in which air moves down from building attics into the occupied space, such as when a whole house fan is inadequately vented to the outdoors (and the attic is both pressurized and its dust stirred up by the fan).

A fiberglass batt provides less total volume of small particles to be stirred by an attic fan than does granular insulation such as vermiculite, rockwool, blown-in cellulose, or even chopped fiberglass (used in blown-in installations).

We'd also need to consider the average particle size and weight when evaluating the ease with which a material becomes airborne.

So particle density or density of an insulation material per cubic foot is not the whole story.

What is Slag Wool Insulation?

Slag wool is a manmade vitreous fiber made by spinning slag into insulating fibers. Some rockwool producers use nearly pure recycled steel slag.

Do Rock Wool, Slag Wool, or Mineral Wool Insulation contain asbestos fibers?

Mineral wool insulation, slag wool insulation, and "rock wool" insulation would not be expected to contain asbestos fibers - We have been unable to find reports indicating otherwise.

How to Avoid Moisture & Settling Problems when Spray Applying Mineral Wool, Rock Wool, Slag Wool Insulation

Because these mineral fiber insulation products are often applied by spraying as a wet slurry onto building surfaces or into building cavities, they should not be covered by a vapor retarder barrier until the insulation has dried.

We recommend using a long-probe moisture meter such as models made by Delmhorst™ to assure that the rock wool sprayed into building cavities has dried to ambient indoor humidity before the wall or ceiling is covered with a vapor retarder or enclosed.

Mineral wool insulation is used by some manufactured home and possibly some mobile home manufacturers. Because these structures are later transported to their ultimate building site the insulation is exposed to vibration that can cause settling of the insulation within building cavities.

Wet-process blown-in mineral wool insulation thickness can decrease by up to 16% in this case, according to Graves and Yarborough. What the study did not examine, and which may be still more important, would be the development of gaps at the tops or sides of vertical wall sections if settlement moves the wall cavity insulation. ["An Evaluation of the Settling of Loose-Fill Rock Wool Insulation in the Attics of Two Manufactured Home Units", ASTM, Graves RS, Yarbrough DW, January 1990. ]

What is the insulating value of mineral wool?

This is a good insulating material and has a better "R" value and more sound-reduction ability per inch than some fiberglass. Rock Wool insulating Batts have an R value of about 3.14 to 4.00 per inch. Blown-in rock wool or mineral wool insulation such as that shown in our attic photo above, has an R value of about 3.10-4.00 per inch.

Other sources we researched indicated that slag wool loose-fill insulation had an R value of about R-2 to R 3.3 and one source claimed an R value of 4.1 per inch for rock wool. [Home Energy Magazine Online, July/August 1997]

A safe rough estimate is to assume mineral wool made of rock or slag has an R value of about 3.35 per inch in batt form and an R value of about 2.25 in loose fill installations.

To compare insulating material R-values see our Table of Properties of Insulating Materials

Use links just below or at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

IDENTIFICATION of ASBESTOS in BUILDINGS
Asbestos Risk Assessment
INTERIORS
INSULATION INSPECTIONS
Insulation Materials
  Asbestos Identification in Buildings
  Asbestos Pipe Insulation
  Asbestos-Free Insulation Materials
  Balsam Wool Batt Insulation
  Cotton Insulating Batts
  Cellulose loose fill insulation
  Fiberglass Insulation
  Foam Board Insulation
  Foam Spray Icynene Insulation
  Mineral Wool/Rock Wool Insulation
  Paper Duct Insulation
  Perlite Insulation
  Urea Formaldehyde Foam Insulation UFFI
  Vermiculite Insulation
Heat Loss Calculations
Insulation Material Identification Guide
Insulation R-Values & Properties
LIST of Asbestos Containing Products
Mold Growth Resistance of Foam Insulation

Technical Reviewers & References

Particular thanks are due to experts and also consumers who read these articles and suggest corrections, changes, and additions to the material. Content suggestions, technical corrections and content critique are invited for any of the content at our website.

• Daniel Friedman - principal author/editor of the InspectAPedia ^TM Website
• 3/07: thanks to Gary Randolph, Ounce of Prevention Home Inspection, LLC Buffalo, NY, for attentive reading and editing suggestions. Mr. Randolph can be reached in Buffalo, NY, at (716) 636-3865 or email: gary@ouncehome.com
• 06/07: thanks for photographs of transite asbestos heating ducts, courtesy of Thomas Hauswirth, Managing Member of Beacon Fine Home Inspections, LLC and (in 2007) Vice President, Connecticut Association of Home Inspectors Ph. 860-526-3355 Fax 860-526-2942 beaconinspections@sbcglobal.net
• Technical reviewers are invited to comment or ask questions - contact us

More expert information on Asbestos Identification, Recognition, & Testing

More Information on Asbestos Contamination, Other Airborne Fiber Hazards, & Building Diagnostic Inspections and Repairs

• Asbestos: How to find and recognize asbestos in Buildings - visual inspection methods, list of common asbestos-containing materials
• Asbestos HVAC Ducts and Flues field identification photos and guide
• Fiberglass: Indoor Air Quality Investigations: Health Concerns About Airborne Fiberglass: Fiberglass in Indoor Air from HVAC ducts, and Building Insulation
• Enviro-Scare: Electric Power Lines, Electromagnetic Fields, Cancer Risk, & "Enviro-Scare" - The Normal Curve Cycle of Public Fear of Environmental Issues
• Dust from the World Trade Center collapse following the 9/11/01 attack: the lower floors of this building contained spray-on fire-proofing asbestos materials.
• Asbestos Information Links: Asbestos Detection, Testing, Recognition, Hazards, Field Photos, and Information Sources, including health-related links such as legal services and information about mesothelioma and other cancers.
• Asbestos Identification and Testing References
• Asbestos Identification, Walter C.McCrone, McCrone Research Institute, Chicago, IL.1987 ISBN 0-904962-11-3. Dr. McCrone literally "wrote the book" on asbestos identification procedures which formed the basis for current work by asbestos identification laboratories.
• Stanton, .F., et al., National Bureau of Standards Special Publication 506: 143-151
• Pott, F., Staub-Reinhalf Luft 38, 486-490 (1978) cited by McCrone

Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Research & Advice

The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems

Home Inspection Construction Consulting Services & advice for home buyers

Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab

Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search This Website - InspectAPedia.com