InspectAPedia ^TM

Designs for Hidden Lightning Protection Systems ElectricAPedia © Enter your search terms Submit search form   Search This Website - InspectAPedia.com Hidden Lightning Protection Design Specifications

This website describes common lightning protection systems, certification, installation, and lightning protection system inspection. We provide information about lightning strikes, lightning hazards, related equipment, sources of lightning protection system installers, and lightning strike risk assessment © Copyright 2008 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left.

Design Details for Hidden Lightning Protection Systems Using Copper Components

Example Hidden Lightning Protection System Installation Details

• As with any good construction project, the contract will include a statement that "All equipment shall be installed in a neat workmanlike manner by an experienced installer. That last part, "experienced installer" is very important in this case since sloppy or improper details can increase rather than reduce the hazards of lightning damage.
• All lightning protection system cables shall be concealed within the building, running along the ridge board, down rafters, down wall studs, and shall exit the building as close to the ground as possible. If construction is incomplete and a chimney has not been extended above the roof line at the time of installation of the lightning protection system, the lightning protection system cables can be concealed within the masonry.
• All components and work shall meet or exceed all national safety and electrical codes including the Lightning Protection Institute (LPI) and the National Fire Protection Association (NFPA), and all components used shall be approved and listed for that purpose by the Underwriters Laboratories (UL).
• The source of all materials is usually listed in order to assure that they are accountable and code-compliant. These lightning protection system specifications and details were provided to us during presentations on lightning protection systems provided to NY ASHI home inspectors and conducted by Associated Lightning Rod Co..

Example Hidden Lighting Protection System Materials

• Building chimneys shall be protected with an air terminal to be placed no more than 2' from any outside corner.
• Lightning protection system air terminals shall be solid copper, round, pointed, 3/8" or larger in diameter, project at least 10" above the object or building section to be protected, and shall comply with UL and LPI requirements for lightning protection systems and shall be located within 2' of outside corners and at intervals no greater than 20 horizontal feet (along the ridge line).
• Air terminal bases shall be made of cast bronze and shall be securely mounted using pressure-bolt or crimp connectors and stainless steel screws, nails, or bolts.
• Lightning Protection System Cabling shall all be 28-strand 16 gauge copper (230#/1000', 72,258 mils or equivalent).
• Corrosion protection shall be provided by lead coating on metal components (air terminals, terminal bases, cable connectors, strapping,) where located within 2' of the chimney top.
• Cable fasteners shall be made of 1/2" wide 20 ga. copper strips and shall be spaced at 2' intervals (exceeding the UL and LPI requirements).
• Ground rods shall be at least 1/2" in diameter and 11' long, and driven into the ground 10', leaving 1' of the ground rod exposed [this is the UL standard] and shall be connected to the lightning protection system by two-bolt cast-bronze clamps at least 1.5" long and using stainless steel cap screws. UL requires that at least two ground rods shall be installed.
• Metal components on the building such as antennas, weather vanes, and metal gutters are connected to the roof or down conductor
• Building ground-devices such as water piping, electrical systems, telephone, cable, internet systems, and metal waste piping shall be grounded in common and bonded to the lightning protection system using full-sized grounding conductors.
• Other hardware such as miscellaneous bolts, nuts, nails, screws, shall be stainless steel.
• Surge protection devices are installed at receptacles on for circuits serving electronic equipment like computers, TV's, or other electronics. Surge protection may also be installed at the electrical panel to protect the circuit serving a well or well pump, or to protect equipment from strikes drawn to steel well casings protruding above ground as well as to protect building appliances.

Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

Lightning Protection Systems
What is Lightning?
Lightning Protection Systems
How do Lightning Systems Work?
Damaged, Unsafe Lightning Systems
Lightning Protection Certification
Outdoor Lightning Protection Design
Lightning Protection for Trees
Hidden Lightning Protection Design
Lightning Strike Risk Assessment
How to Avoid Being Struck by Lightning
Lightning Strikes Small Boat

Technical Reviewers

Particular thanks are due to experts and also consumers who read these articles and suggest corrections, changes, and additions to the material. Content suggestions, technical corrections and content critique are invited for any of the content at our website.

• Daniel Friedman - principal author
• Portions of this information are based on UL publication 200-81 11/87 and other local service company information about lightning protection systems and lightning strike hazards.
• Special thanks to Associated Lightning Rod Company, Cooper Road Box 329A, Millerton NY who has been contributing technical content in presentations to NY ASHI home inspectors since 1996. Some of that information [on lightning system material and installation details] was edited for clarity. ALRCi can be reached at 518-789-4603, 845-373-8309, 860-364-1498 and will inspect your lightning protection system at no charge. [We have no financial nor any other business relationship with any company or product discussed at this website--DF]
• For more details on how lightning protection systems work, see Lightning Protection from Pacific Electric and Gas Company, and Electrical System Grounding and Lightning Protection, Engineering Technical Letter 90-6, Department of the Air Force, HQ USAF.
• Lightning strike risk assessment: for the full body of this excellent article which summarizes recent opinions about lightning strike risk assessment and safe practices for individuals or groups needing to avoid being struck by lightning, see Updated Recommendations for Lightning Safety - 1998 Ronald L. Holle and Raul E. Lopez from National Severe Storms Laboratory, NOAA and Norman, Oklahoma, Christoph Zimmermann Global Atmospherics, Inc. Tucson, Arizona
• As we indicated in an original version of this article, a lightning strike risk assessment guide can be found in Appendix I of the National Fire Protection Association's Lightning Protection Code, NFPA #780. The guide considers type of structure, type of construction, structure location, topography, occupancy, contents and lightning frequency. Contact NFPA, Batterymarch Park, Quincy, MA 02269 617-770-3000.
• Lightning Protection Institute, 3365 N. Arlington Heights Rd., Suite J., Arlington Heights IL 60004
• Underwriters Laboratory Standard UL96A. These requirements cover the installation of lightning protection systems on all types of structures other than structures used for the production, handling, or storage of ammunition, explosives, flammable liquids or gases, and other explosive ingredients including dust. These requirements apply to lightning protection systems that are complete and cover all parts of a structure. Partial systems are not covered by this standard. These requirements do not cover the installation of lightning protection systems for electrical generating, distribution, or transmission systems. These requirements do not cover lightning protection components, which are covered by the Standard for Lightning Protection Components, UL 96.
• Underwriters Laboratory Standard UL96: These requirements cover lightning protection components for use in the installation of complete systems of lightning protection on buildings and structures. These requirements do not cover the installation of lightning protection components. Products of this type are covered by the Standard for Installation Requirements for Lightning Protection Systems, UL 96A.
• Critique, contributions wanted: Contact Us to suggest text changes and additions and, if you wish, to receive online listing and credit for that contribution.

More Information on Lightning Protection Systems & Building Inspections, Diagnosis, & Repair

• Armor Lightning Protection Inc Manchester Center, VT, 802-375-0266 state-of-the-art lightning protection and surge protection for residential and commercial buildings in Vermont, New England, and throughout the Northeast
• Associated Lightning Rod Company, Inc., Box 329A, Cooper Road, Millerton, NY 12546 914/373-8309 518/789-4603
• A-C Lightning Security, Inc., 2100 East First St., PO Box 329, Maryville MO 64468 816-582-8115 800-821-5575 816-562-2932. In New York, Hudson Valley, contact Christensen Electrical Power Systems, Richard G. Christensen, 518-537-4128.
• Lightning Eliminators & Consultants 6687 Arapahoe Road Boulder, CO 80303 (303) 447-2828. "Engineering Solutions For Lightning, Grounding and Surge Protection Worldwide Since 1971"
• Electrical EINET
• Lightning Protection for Facilities, Dr. Bruce Gabrielson, Robert B. Marcus, Published and presented: EMCEXPO92, Washington D.C.
• MIT's Electrical Safety Files
• Newton's International Electrical Journal
• Lightning Protection for Workers What to Do if You're Outside in a Lightning Storm - Center to Protect Workers' Rights (PDF)
• 1998 and Current Lightning Protection Conferences & Exhibitions
• Lightning Risk and Hazard Analysis Measurement from the National Lightning Safety Institute (NLSI).
• "Lightning Fatalities, Injuries, and Damage Reports in the United States from 1959-1994", E. Brian Curran, Ronald L. Holle, Raul E. Lopez, NOAA Technical Memorandum NWS SR-193 October 1997
• UL - Underwriters Labs Lightning equipment certification program. "Underwriters Laboratories Inc. (UL) has been testing and certifying lightning protection equipment since 1908. UL issues certificates of conformance for systems, inspecting system components and checking completed installations. Installations are required to comply with UL's internationally recognized Standards for lightning protection systems. Manufacturers, suppliers and installers demonstrate their commitment to safety by building, selling and installing only those lightning protection products that pass UL's rigorous testing." -- (Op.Cit.)



• * Safety Hazards and Safe Inspection Procedures for Electrical and Home Inspectors at Residential Electric Panels
• Aluminum Wiring Information Website Aluminum Electrical Wiring Hazards and Repairs: in-depth authoritative info, photos, documents including selection of proper vs. ineffective repair methods. E.g.: Ideal 65 "Twister" purple connector fails in field and lab testing with aluminum wire.
• Ampacity of an Electrical Service: How to determine the electrical service size or ampacity entering a building
• Circuit Breaker, a bad one fails to trip failure at aluminum bus-to-circuit breaker connection - field report and photographs
• Electrical Panels, How to Inspect in Buildings, safety for electrical inspectors, electrical panel, fusing, wiring defects, defective products. Inspection Class Presentation
• Federal Pacific Electric (FPE) Stab-Lok Circuit Breaker Panel Hazards Website - Latent fire hazards, in-depth authoritative research, documents, advice on Stab-Lok electric panel and circuit breaker failures and what to do when this equipment is found in buildings.
• Lightning Strike Risk Assessment, Protection Systems & Services
• Multi-wire branch circuit inspection and defects
• Rust and Corrosion in Electrical Panels, A Study and Report on Frequency and Cause for Electrical and Home Inspectors at Residential Electric Panels


• Directory of Home Inspectors accessible via internet
• Electrical System & Wiring Hazard Inspection, Detection, Cause, Remedy, Prevention - Main Electrical Page

InspectAPedia ^TM Home & Site Map - Building Inspection, Diagnosis, & Repair, Environmental Inspection & Testing - Research Website

Home Inspection Construction Consulting Services & advice for home buyers

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search This Website - InspectAPedia.com