InspectAPedia ^®

Guide to Alternative Hot Water Sources HeatAPedia © Enter your search terms Submit search form   Search This Website - InspectAPedia.com

• Description of Types of Alternative Hot Water Heating Methods: electric, gas, high efficiency gas, oil, high efficiency oil, solar, tankless coils, instantaneous water heaters, point of use water heaters
• How to use multiple water heaters in series for more hot water and lower hot water cost
• Guide to range boilers & guide to side arm coil water heaters
• Solar water heater suggestions to save on water heating cost

Here we discuss alternative methods of providing domestic hot water, comparing the characteristics of various hot water heating methods and describing different ways to heat water for washing and bathing. Thanks to Carson Dunlop, a Toronto Home Inspection Firm and Home Inspection Educator, for permission to use sketches shown in this article.

Contact us to suggest text changes and additions and, if you wish, to receive online listing and credit for that contribution. © Copyright 2008 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use the links at page left to navigate this document or to go to Other Website Topics. Green links at left show where you are in our document & website.

There are easy steps one can take to determine why the hot water pressure or quantity in a building are inadequate. We discussed tankless coils for making hot water, anti scald valves, and the problem of clogged hot water piping or clogged tankless coils. Then we discussed steps to increase hot water quantity such as insulating water piping and water tanks, and the use of extra tanks to pre-warm or store hot water.

Below we describe some alternative ways to make hot water, either to replace or to supplement an existing hot water supply system. After knowing what the hot water problem really is, there are steps we can take to get more hot water or to increase hot water pressure.

A Comparison of Alternative Hot Water Heaters & Sources

The following articles discuss alternative ways to produce domestic hot water for washing and bathing.

• High Efficiency Water Heaters such as direct-vent gas-fired water heaters
• Indirect-fired Water Heaters which use a separate heating boiler to produce a larger quantity of hot water
• Instantaneous Water Heaters point of use systems that have little or no standby energy losses
• Multiple water heaters in parallel to increase total hot water quantity
• Multiple water heaters in series to stage hot water heating for varying levels of demand
• Range Boiler Water Heaters an older form of indired-fired hot water heating used with separate heating boilers
• Side Arm Coil Water Heaters similar to instantaneous and tankless coil water heaters, often used with range boilers
• Solar Water Heaters using solar collectors, an indoor water tank, pump and controls, using minimal "on-grid" energy
• Tankless Coil Hot Water Increase a heat exchanging coil immersed inside of a heating boiler heats provides (somewhat limited) hot water. various tricks can significantly improve the safety and water quantity available

The characteristics of various water heaters such as life expectancy, cost, safety, and capacity are discussed at WATER HEATER PROPERTIES

Ways to improve total hot water quantity, pressure, temperature and flow are discussed beginning at HOT WATER IMPROVEMENTS and continuing at HOT WATER QUANTITY IMPROVEMENT.

Multiple Hot Water Sources? How to Use Separate Oil, Gas, or Electric, Solar, Wind, or Combination-fuel Water Heaters for More Hot Water

Separate water heaters can provide more hot water than a tankless coil in most cases and choices among water heater types by fuel, size, recovery rate, etc. can make a big difference in the hot water quantity, pressure, flow, and cost at a building. Here we discuss some alternative water heating methods.

Use Instantaneous Water Heaters for Increased Hot Water Supply

How to connect multiple water heaters in parallel to increase total hot water quantity

How to increase hot water quantity using multiple water heaters in series for lower hot water cost

Some buildings use water heaters installed in series to handle variations in hot water demand more economically. Unlike the illustration of parallel water heaters shown above, water heaters connected in series means that incoming cold water flows first into heater #1, then out of heater #1 into heater #2, then out of heater #2 into the building hot water supply piping (or into additional water heaters if more than two are used.)

A synonym for water heaters connected in series is a cascaded water heater design. Cascaded or in-series water heaters is an economical way to handle large variations in hot water demand in a building.

• When the anticipated hot water demand is low, only water heater #2 may be running.
  
  
• When the anticipated hot water demand is high, water heater #1 is turned on as well, doubling the volume of hot water available (if the heaters are of the same capacity in gallons or liters).
  
  
• Water heater controls can be adjusted so that the "upstream" water heater, (water heater #1 in our example), is left turned off or perhaps set to a very low temperature. In either of these cases, the upstream water heater or tank functions as a "booster water warmer" reducing the energy use by water heater #2 by pre-warming water entering the active heater#2.

See Extra Tanks to Increase Hot Water for more discussion of extra tanks to provide more hot water.

Use of a Side Arm Coil to Make Hot Water from a Heating Boiler

Use links just below or at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

WATER HEATERS
ALTERNATIVE HOT WATER SOURCES
  High Efficiency Water Heaters
  Indirect-fired Water Heaters
  Instantaneous Water Heaters
  Multiple water heaters in parallel
  Multiple water heaters in series
  Range Boiler Water Heaters
  Side Arm Coil Water Heaters
  Solar Water Heaters
ANTI SCALD VALVES
CHIMNEY INSPECTION DIAGNOSIS REPAIR
Clogged Piping & Hot Water Flow
ELECTRIC WATER HEATERS
GAS FIRED WATER HEATERS
  DRAFT HOODS - gas fired
  Gas BTUH & Cubic Feet
  GAS PIPING, VALVES, CONTROLS
  SPILL SWITCHES - Flue Gas Detection
HOT WATER IMPROVEMENTS
HOT WATER QUANTITY IMPROVEMENT
  Alternative Hot Water Sources & Methods
  Anti-Scald Valves & Hot Water Quantity
  Clogged Piping & Hot Water Flow
  Extra Tanks to Increase Hot Water
  Insulate Hot Water Piping
  Insulate Hot Water Tank?
  Larger Diameter Water Supply Piping
  Tankless Coil Hot Water Increase
  Temperature of Hot Water is Too Low
INDIRECT FIRED WATER HEATERS
ODORS IN WATER
OIL FIRED WATER HEATERS
  DRAFT REGULATORS - barometric dampers
  OIL BURNERS
  OIL BURNER NOISE SMOKE ODORS
  OIL PIPING
  OIL TANKS
MIXING VALVES
RANGE BOILERS
RELIEF VALVES - TP Valves
SEWER GAS ODORS
SOLAR HOT WATER HEATERS
TANKLESS COILS
  Clogged Piping / Tankless Coil & Hot Water Flow
  Mixing Valves
  Tankless Coil Leaks
  Tankless Coil Hot Water Increase
WATER HEATER PROPERTIES
  Electric, Gas, Oil Water Heater Efficiency
  Water Heater Life Expectancy Comparisons
  Water Heater Operating Cost Comparisons
  Water Heater Purchase & Maintenance Costs
  Water Heater Water Quantity Comparisons
  Water Heater Recovery Speed Comparisons
  Water Heater Safety Comparisons
More Information

Technical Reviewers & References

Particular thanks are due to experts and also consumers who read these articles and suggest corrections, changes, and additions to the material. Content suggestions, technical corrections and content critique are invited for any of the content at our website.

• Daniel Friedman - InspectAPedia.com ^TM Website Author/Editor
• Thanks to Alan Carson and Bob Dunlop, Carson Dunlop, Associates, Toronto, for permission to use illustrations from their publication, The Illustrated Home which illustrates construction details and building components. Carson Dunlop provides home inspection education, publications, report writing materials, and home inspection services. Alan Carson is a past president of ASHI, the American Society of Home Inspectors.
• Critique, contributions wanted: Contact Us to suggest text changes and additions and, if you wish, to receive online listing and credit for that contribution.

Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

More expert information on this topic

More Information on Inspecting and Repairing Heating Systems

• Carbon Dioxide Gas Toxicity
• Carbon Monoxide Gas Toxicity, exposure limits, poisoning symptoms, and inspecting buildings for CO hazards
• Dust from HVAC? An Investigation of Indoor Dust Debris Blamed on a Heating/Cooling System Reveals Carpet Dust
• Goodman Furnace High Temperature Plastic Vent HTPV safety recall US CPSC notice
• Home Heating System Should Be Checked [for proper venting and for CO Carbon Monoxide Hazards - DJF]
• Inspection Procedures for Oil-Fired Heating Systems Detailed step by step approaches for inspecting complex systems]
• Lennox Pulse Furnace Safety Inspection/Warranty Program: Carbon Monoxide Warning
• Oil Tanks - The Oil Storage Tank Information Website: Buried or Above Ground Oil Tank Inspection, Testing, Cleanup, Abandonment of Oil Tanks
• Oil Tanks Above Ground, UL Standards, guidance for home owners, buyers, and inspectors
• Plastic Heating Vent Pipe & Other Heating Safety Recall Notices
• Weil McLain Model GV Gas Boiler/gas valve CPSC recall/repair
• Domestic and Commercial Oil Burners, Charles H. Burkhardt, McGraw Hill Book Company, New York 3rd Ed 1969.
• National Fuel Gas Code (Z223.1) $16.00 and National Fuel Gas Code Handbook (Z223.2) $47.00 American Gas Association (A.G.A.), 1515 Wilson Boulevard, Arlington, VA 22209 also available from National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. Fundamentals of Gas Appliance Venting and Ventilation, 1985, American Gas Association Laboratories, Engineering Services Department. American Gas Association, 1515 Wilson Boulevard, Arlington, VA 22209. Catalog #XHO585. Reprinted 1989.
• The Steam Book, 1984, Training and Education Department, Fluid Handling Division, ITT [probably out of print, possibly available from several home inspection supply companies] Fuel Oil and Oil Heat Magazine, October 1990, offers an update,
• Principles of Steam Heating, $13.25 includes postage. Fuel oil & Oil Heat Magazine, 389 Passaic Ave., Fairfield, NJ 07004.
• The Lost Art of Steam Heating, Dan Holohan, 516-579-3046 FAX
• Principles of Steam Heating, Dan Holohan, technical editor of Fuel Oil and Oil Heat magazine, 389 Passaic Ave., Fairfield, NJ 07004 ($12.+1.25 postage/handling).
• "Residential Steam Heating Systems", Instructional Technologies Institute, Inc., 145 "D" Grassy Plain St., Bethel, CT 06801 800/227-1663 [home inspection training material] 1987
• "Residential Hydronic (circulating hot water) Heating Systems", Instructional Technologies Institute, Inc., 145 "D" Grassy Plain St., Bethel, CT 06801 800/227-1663 [home inspection training material] 1987
• "Warm Air Heating Systems". Instructional Technologies Institute, Inc., 145 "D" Grassy Plain St., Bethel, CT 06801 800/227-1663 [home inspection training material] 1987
• Heating, Ventilating, and Air Conditioning Volume I, Heating Fundamentals,
• Boilers, Boiler Conversions, James E. Brumbaugh, ISBN 0-672-23389-4 (v. 1) Volume II, Oil, Gas, and Coal Burners, Controls, Ducts, Piping, Valves, James E. Brumbaugh, ISBN 0-672-23390-7 (v. 2) Volume III, Radiant Heating, Water Heaters, Ventilation, Air Conditioning, Heat Pumps, Air Cleaners, James E. Brumbaugh, ISBN 0-672-23383-5 (v. 3) or ISBN 0-672-23380-0 (set) Special Sales Director, Macmillan Publishing Co., 866 Third Ave., New York, NY 10022. Macmillan Publishing Co., NY
• Installation Guide for Residential Hydronic Heating Systems
• Installation Guide #200, The Hydronics Institute, 35 Russo Place, Berkeley Heights, NJ 07922
• The ABC's of Retention Head Oil Burners, National Association of Oil Heat Service Managers, TM 115, National Old Timers' Association of the Energy Industry, PO Box 168, Mineola, NY 11501. (Excellent tips on spotting problems on oil-fired heating equipment. Booklet.)

InspectAPedia® Home & Site Map - Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice: In-depth research & advice on diagnosing, testing, correcting, & preventing building defects & indoor environmental hazards. Unbiased information, no conflicts of interest.

The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems

Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab

Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.

Building Inspection, Problem Diagnosis, Forensic Investigation & Testing, Repair Consulting

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search InspectAPedia.com