InspectAPedia ^TM

Using Pressure Dosing as a Component of Alternative Septic Systems for Difficult Sites SepticAPedia © Enter your search terms Submit search form   Search This Website - InspectAPedia.com

• Design for pressure dosing septic systems
• Gravity dosing septic system designs
• Manifold dosing septic system designs and applications
• Rigid pipe dosing septic system designs and applications
• Dripline dosing systems for septic effluent disposal

This document discusses types of effluent pressure dosing septic systems, including gravity dosing, pressure manifold dosing, rigid pipe pressure dosing, and dripline effluent dosing systems for septic system effluent final treatment and disposal. Citation of this article by reference to this website and brief quotation for the sole purpose of review are permitted. Use of this information at other websites, in books or pamphlets for sale is reserved to the author. Technical review by industry experts has been performed and is ongoing - reviewers welcomed and are listed at "References." © Copyright 2008 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use the links at page left to navigate this document or to go to Other Website Topics. Green links at left show where you are in our document & website.

How and When Septic Effluent is Moved Through a Septic System

Septic effluent is distributed to a system final treatment and disposal using either gravity methods (which depend on terrain slope) or pressure methods (which use a pump to move effluent to its destination treatment and disposal area).

Methods For Septic Effluent Distribution Using Gravity Systems

• Single Effluent Line: A 4" perforated PVC pipe receives effluent by gravity from the septic tank. The pipe is buried in a gravel trench and may be run in a straight line or a loop.
• Distibution Box/Network of Lines A distribution box receives effluent by gravity from the septic tank and routes it to a network of perforated pipes. The network is made of mulitple independent trenches which maybe on a flat or sloped site.
• Serial relief line: multiple, serially connected trenches are built on a sloping site and used serially.
• Drop box: multiple independent trenches are built on a sloping site, connected from drop boxes.
• Gravity Dosing, Bell Siphon Dosing, Float Dosing: 4" perforated pipe, with or without a distribution box, are installed all at a single elevation. A hinged "bucket" chamber receives effluent and periodically, as it fills, the bucket tips to spill effluent into the piping system (A "dipping" or "tipping" system). Bell siphon dosing systems (a bell and siphon method of moving effluent to the drainfield) and float-controlled septic effluent dosing system designs are also available. Gravity dosing systems distribute effluent periodically rather than continuously to the absorption field, letting the field rest between doses and extending its life and capacity. However because the effluent dose is "poured" suddenly into the drainfield, local spot or point overloading may still occur. Gravity dosing systems are described in more detail at GRAVITY/SIPHON DOSING SYSTEMS

The purpose of septic effluent "dosing" systems is to place septic effluent in the absorption system or drainfield at intervals rather than continuously. In effect, the effluent dosing chamber forms a "buffer" which receives and stores septic effluent flowing (or being pumped) out of the septic tank until a desired dosing quantity is reached. Then the effluent is dispersed to the absorption system in one "dose." By distributing effluent at intervals rather than on a more nearly continuous or irregular basis the absorption system can "rest" between cycles, extending its life and possibly increasing its ultimate effluent treatment and disposal capability. Not only does the rest interval permit the absorption system more time to dispose of its effluent, also the exposure of the system to air between doses can reduce the rate of clogging of the drainfield.

Methods For Septic Effluent Distribution Using Pressure Dosing Systems

Each septic effluent dosing system has its particular operating characteristics, so one type may be more suitable than others to a particular site. These types of pressure dosing septic systems are discussed here:

• Pressure Dosing Methods permit effluent to be dispersed over the entire absorption field more uniformly than with gravity dosing systems, making maximum use of the absorption system capacity and avoiding the problem of local area or point overloading in the absorption field.
• Pressure manifold: multiple independent trenches on sloped sites or multiple independent trenches receive effluent from a larger mainfold pipe which is fed by an effluent pump from a pumping chamber.
• Rigid Pipe Pressure Network: multiple independent trenches at the same elevation receive effluent from an effluent pump and pumping chamber.
• Dripline Pressure Dosing Network: multiple independent pressure drip trenches on flat or sloping sites receive effluent from a pump and pumping chamber at low pressure (potentially even by gravity) where effluent is fed through small pipe openings permitting it to drip at a slow, controlled rate, into the trench and soils.

When Septic Effluent is Moved Through a Septic System

Wastewater effluent is distributed for final treatment over time either by uncontrolled, or controlled methods.

Uncontrolled septic effluent flow: A conventional gravity septic system and drainfield is "uncontrolled". When waste enters the septic tank, it forces the same volume of effluent out of the tank and into the leach field. Some experts call this a continuous or trickling septic system. Conventional septic tank and drainfields use this approach. The timing of effluent movement or "trickle" into the absorption field is based simply on when people are using the building plumbing and thus based simply on when wastewater flows out of the building into the septic tank.

Controlled septic effluent flow: in controlled systems effluent is sent to the final treatment and disposal system such as an absorption field under either mechanical control such as a tipping or siphon system or under pump control, such as by use of a dosing system which makes use of a gravity dosing method or a pressure dosing method such as septic effluent pressure manifold, rigid pipe distribution, or a septic effluent drip network. In some large wastewater treatment systems with a significant if not uniformly continuous inflow, outflow of the system may be continuous in some designs. But many system use an intermittent effluent dosing method which operates by a pump controlled perhaps by a float in an effluent receiving chamber, or by a siphoning or tipping bucket mechanical system (gravity systems).

Pressure Distribution and Pressure Dosing Septic System Design Specifications

Pressure-dosed Drainfield Septic Systems use a separate effluent pumping chamber and an effluent pump such as the system in this sketch. The effuent pumping station is located downstream from the septic tank and is ued to move septic effluent into a pressure-fed network of distribution pipes. In some designs the effluent is pumped to move it up to the absorption field where it then moves by gravity. Other systems pressurize the entire piping network. Pressure dosing is used in a variety of disposal field designs including mounds and sand beds, and have the advantage of being able to distribute effluent uniformly throughout the absorption system, and the disadvantage of added system cost and complexity, along with the requirement for electricity for system operation. An alternative but possibly less long-term reliable version of a drainfield dosing system that does not require electricity is the siphon system. The sketch shows a generic pumping station of the type used with many pressure dosing systems, source US EPA and Purdue University.

Source for the following is New York State regulations on wastewater treatment and design for individual household septic systems (Note b below) and from the U.S. EPA Wastwater Manual.

(1) These methods permit the rapid distribution of effluent throughout the absorption system followed by a rest period during which no effluent enters the system. The maximum length of absorption lines used in conjunction with these methods shall be 100 feet.

(i) Pressure distribution utilizes a sewage effluent pump to move the effluent through the pipe network and into the soil. The volume discharged in each cycle will exceed the volume available in the pipe network and will be discharged from the pipe under pressure.

(ii) Dosing involves the use of a pump or siphon for pressure dosing septic systems to move the effluent into the pipe network. Discharge from the pipe is by gravity. The volume of effluent in each dose should be 75% to 85% of the volume available in the pipe network.

(2) Dosing or pressure distribution is recommended for all septic systems as it promotes better treatment of wastewater and system longevity.

(3) In absorption fields, single pressure dosing units are required when the total trench length exceeds 500 feet. Alternate dosing units are required when the length exceeds 1,000 feet.

(4) The use of manually operated siphons or pumps for pressure dosing septic systems is not acceptable.

(5) Pipe used in pressure dosing septic systems distribution shall have a minimum diameter of 1.5 inches and a maximum diameter of three inches. Pipe for siphon dosing is sized to conform with the volume of the dose and can range from three to six inches in diameter based upon the volume of each dose. The ends of all pipes shall be capped.

(6) Only pumps for pressure dosing septic systems designated by the manufacturer for use as sewage effluent pumps shall be used.

(7) Pump chambers for pressure dosing septic systems shall be equipped with an alarm to indicate malfunction. Siphon dosing systems normally include an overflow to the distribution laterals. Pressure distribution systems shall not be equipped with an overflow.

(8) Pump chambers for pressure dosing septic systems shall be sized to provide a minimum of one day's design flow storage above the alarm level. Siphon chambers shall have a minimum total storage of one day's design flow below the overflow pipe.

Footnote (b): The preceding example septic pressure dosing system design and descriptive data for septic effluent pressure distribution and pressure dosing systems is from Appendix 75-A to Public Health Law, 201(1)(1) New York State Wastewater Treatment Standards - Individual Household Septic Systems, Wastewater Treatment Design and Regulation Section, specifically chapter 75-A.7 Distribution lines, distribution boxes, gravity flow, pressure distribution, dosing, siphons

Manifold Pressure Dosing Effluent Dispersal Systems

Rigid Pipe Pressure Dosing Effluent Dispersal Systems

Pressure Drip Dosing Effluent Dispersal Systems - Drip Line Septic Systems

Pressure Dosing Septic System Products and Suppliers

Please see ALTERNATIVE SEPTIC PRODUCTS and also review the suppliers listed at ATU Suppliers

More expert information on this topic

More Information on Septic System Diagnosis, Maintenance, & Repair

• The Septic System Information Website home page for this topic
• Septic Systems Inspection, Testing, & Maintenance- online textbook. Detailed how to inspect, maintain, repair information
• The Home Buyer's Guide to Septic Systems
• Septic Tank Pumping Guide: When, Why, How to pump the septic tank
• Home & Outdoor Living Water Requirements
• Septic Tank Capacity vs Usage in Daily Gallons of Wastewater Flow, calculating required septic tank size, calculating septic tank volume from size measurements
• How Big Should the Leach Field Be? - table of soil percolation rate vs. field size
• Septic System Drainfield Absorption System Biomat Formation - what leads to drain field clogging and expensive drainfield repairs
• Table of Required Septic & Well Clearances: Distances Between Septic System & Wells, Streams, Trees, etc.

InspectAPedia ^TM Home & Site Map - Building Inspection, Diagnosis, & Repair, Environmental Inspection & Testing - Research Website

Home Inspection Construction Consulting Services & advice for home buyers

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search This Website - InspectAPedia.com