InspectAPedia ^TM

Septic Tank Condition - How to Inspect Concrete Septic Tanks SepticAPedia © Enter your search terms Submit search form   Search This Website - InspectAPedia.com

• Characteristics of concrete septic tanks
• Types of Septic Tanks: steel septic tanks, concrete septic tanks, fiberglass septic tanks, home made septic tanks - definitions and characteristics of various types of septic tanks

This document describes how to inspect the condition of a septic tank, providing special considerations for inspecting concrete septic tanks. Inspecting concrete septic tanks is a key component in onsite wastewater disposal systems. This is a chapter of Septic Systems Inspection, Testing our online book about septic system inspection procedures, defects in onsite waste disposal systems, septic tank problems, septic drainfield problems, checklists of system components and things to ask. Also see The Septic Information Website our main page of articles and information about septic systems and onsite wastewater disposal systems inspection, testing, diagnosis, maintenance, and repair. © Copyright 2008 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use the links at page left to navigate this document or to go to Other Website Topics. Green links at left show where you are in our document & website.

The photo shows a round concrete septic tank cover being removed to prepare for pumping a concrete septic tank. This is a safe cover and is rated thick enough to be driven-over by a car - but we do not recommend that practice. Of course the area is quite unsafe while the septic tank cover is off - we would not leave the tank cover off and the area unattended. Concrete septic tanks at an existing septic installation are usually viable, but might have damaged baffles or cracks that permit seepage of groundwater in or septic effluent out around the tank. Occasionally we've seen tanks made of poor-quality concrete (insufficient portland cement) which eroded badly. If the tank outlet or absorption system have been blocked, examination of the tank interior may show that effluent is or has been above the top of the baffles (see "baffles" below) thus indicating a system failure discussed next.

Concrete tanks can crack or sections may separate causing leaks with the result of not only improper disposal of effluent (wrong location) but also subverting an attempt at a septic loading and dye test since when the system is un-used the tank liquid levels drop abnormally. The inspector may detect this condition only if there is a tank inspection port which is readily and safely accessible for before, during, and after inspection when running a loading and dye test.

More Reading

• Tank Location - How to Find the Septic Tank
• INSPECTING SEPTIC TANKS - how to inspect septic tanks, a checklist, and the proper sequence of inspection during septic tank pumping
• MEASURE SCUM & SLUDGE - How and Why to Measure Septic Tank Scum and Sludge in the Septic Tank
• EFFLUENT RETENTION TIME - Septic Effluent Retention time and Effective Septic Tank Volume - Why pump a septic tank before it is "full" of solids and grease?

Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

Technical Reviewers

Particular thanks are due to experts and also consumers who read these articles and suggest corrections, changes, and additions to the material. Content suggestions, technical corrections and content critique are invited for any of the content at our website.

• Daniel Friedman - principal author
• Technical reviewers are invited to comment or ask questions - contact us

Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

The Septic Systems Online Book - Where Are We?

More expert information on this topic

More Information About Septic Systems - Onsite Waste Disposal Design, Maintenance, Repair

• Inspecting Septic Systems: Inspection, Test, Diagnosis, Repair, & Maintenance: Our Online Septic Book: Septic Testing, Loading & Dye Tests, Septic Tank Pumping, Clearances, details of onsite waste disposal system inspection, testing, repair procedures.
• Tank Location - How to Find the Septic Tank, how deep will the cover be, how to document its location
• Septic Tank Pumping Frequency Table
• The Septic System Information Website - Extensive, Detailed Consumer and Industry Information on Septic System Inspection, Testing, Maintenance, Alternatives for on-site waste disposal
• Alternative & Advanced Designs for Septic Systems for discussion and links to (on-site waste disposal) System Designs for Problem Sites & Soils. Books, Consultants, Engineers, Designers. Alternative septic system designs can substantially reduce the normal required distances between septic system components and wells, lakes, streams, and property boundaries.

InspectAPedia ^TM Home & Site Map - Building Inspection, Diagnosis, & Repair, Environmental Inspection & Testing - Research Website

The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems

Home Inspection Construction Consulting Services & advice for home buyers

Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab

Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search This Website - InspectAPedia.com