InspectAPedia ^TM

Signs of Septic System Failure: A First Step in Septic Diagnosis
SepticAPedia ^©

	Enter your search terms Submit search form
	Search This Website - InspectAPedia.com

• Septic Inspections & SEPTIC FAILIURE CAUSES - How Does Each Septic System Component Fail?
• What to Look For During a Septic Inspection
• Step by Step Diagnosis of Septic System Failures, clogged drains, odors, sewer backup, wet areas in the yard, and slow drains

This chapter discusses detailed "how to" steps instructing the septic inspection investigator in how to inspect specific septic components for signs of failure. We describe the criteria for saying a septic system has failed, and we take you step by step through the onsite waste disposal system, from the building to tank to absorption system, with suggestions for examining the condition of each component so that a proper diagnosis of the cause of septic failure and a specification of the appropriate repair can be made.

In the photo at the top of this page, a wet spot appeared in the previously "perfect" yard of this older home within twenty-four hours of the new family moving-in. The buyers had obtained a "septic inspection" but it was improperly performed and missed the chance to discover before purchase that the septic system was in total failure. Citation of this article by reference to this website and brief quotation for the sole purpose of review are permitted. Use of this information at other websites, in books or pamphlets for sale is reserved to the author. Technical review by industry experts has been performed and is ongoing - reviewers welcomed and are listed at "References." This document is a chapter of Inspecting, Testing, & Maintaining Residential Septic Systems an online book on septic systems. © Copyright 2008 Daniel Friedman, All Rights Reserved. Information Accuracy & Un-Biased Reporting are Assured for this website - see pledge link at below-left.

SYSTEM FAILURE CRITERIA - Septic System Failure Causes: What Constitutes a "Failed" Septic System?

Before digging up your septic tank or calling a septic pumper, if you think the septic system is failed because of drain blockage or drains backing up into the building, you should to see Diagnosing Clogged Drains: Is it a blocked drain or the septic system? - A First Step for Homeowners. If you link to that text, please return here using your browser's "BACK" button.

Onsite Waste Disposal System Failure Criteria

Massachusetts Title 5 Septic Law lists specific failure criteria and serves as a good model for septic inspections anywhere. (The photograph shows the septic baffles in a concrete septic tank. While at the time of inspection the sewage was not flowing over the baffles, sewage debris atop the concrete baffle shows that at some point that problem had occurred. Further diagnosis was in order. Drain or Sewage Backup anywhere in the system Discharge of effluent to the surface, stream, etc. regardless of whether or not septic dye is observed Static effluent level or floating scum over the top of the baffles in the septic tank [added by DF] Static effluent level above outlet in the D-box Septic Tank or Septic System has to be pumped more than 4x/year Metal septic tanks (municipality dependent; note that in special site conditions small metal tanks may be the "only" solution and may be approved by local officials. An owner/buyer must be informed of the implications of such installations.) Soil Absorption System (or cesspool, etc) is at a depth exposing it to the maximum groundwater level

Contents

HOUSE TO TANK - Septic Piping Failures Between Building Drains and the Septic Tank

Outside, waste piping conducts sewage (black water and gray water) from the building to the treatment tank or "septic tank," and from the treatment tank to the distribution box. Our photo shows a new waste line carrying sewage down from the home to the septic tank in lower yard. The previous waste line had been broken when driven over by a heavy lawnmower. Septic drain lines between the house and the septic tank should be of solid, non-perforated material and need to be protected from mechanical damage (such as by vehicles). Piping extending from the distribution box into drain fields is normally perforated, though solid lines might be used if effluent is being processed by more specialized devices such as seepage pits, galleys, or a sand-bed system. Distribution piping connects the house drain to the septic tank, running between the building and the tank inlet. More distribution piping connects the septic tank outlet to the distribution box and from there to the leach field. Distribution pipes can settle (especially in new construction), break, become blocked or clogged, or become invaded and blocked by tree roots or soils. Older "orangeburg" pipes which look like black asphalt-soaked cardboard (they are) crush and deteriorate with age. Clay pipes also break and have a tendency to become blocked by tree roots at their joints. You won't know what kind of piping is installed until it is excavated, but the age of the property may be a clue. Homes built from the 1970's on, certainly from the 1980's on, use cast iron or more often plastic ABS or PVC piping for these connections. This line may become blocked by waste, damaged by collapse of a section, or invaded by roots. Detection of these conditions is fairly easy by routing a snake or power snake from the building drain to the septic tank. An experienced power snake operator can often tell by "feel" that a drain line is collapsed, partially collapsed, or invaded by roots. While you may make a temporary "repair" of such a condition by drain-cleaning, if the line is broken or root-invaded, you should expect to have to excavate and replace it soon.

SEPTIC TANK FAILURES - How Different Types of Septic Tanks Fail

Steel tank baffles rust off, as you see in the lower left of the above photo which also depicts a very dangerous rusted-out steel septic tank cover. Even if the cover is intact a rusted or lost septic tank baffle sends solids and grease into the leach field, shortening its life. A steel tank baffle is visible in the lower left of this photograph.

• Steel septic tanks rust out and collapse, often sending solids into the leach field and reducing its future life as well. Tank covers themselves can also collapse, especially if made of steel as shown in the same photo as mentioned above. Other tank covers may be made of wood which eventually rots and collapses. Collapsing septic tanks are very dangerous. Falling into a tank is likely to be fatal.
• Concrete tanks are pretty durable but they can crack and leak or may have an unsafe cover.
• Concrete tank baffles can deteriorate, crack, break, fall off.

• Septic Tanks which are not pumped often enough can become filled with sludge and scum, becoming totally impacted. Well before this condition is detected, such systems have sent solids into the leach field, shortening its life.
• Diapers, Toys, Garbage which find their way into building toilets and drains risk clogging the drain piping, distribution piping, or the septic tank baffles. Keep diapers, tampons, sanitary napkins, kids toys, household chemicals, and the like out of your building drains and toilets.
• Garbage disposers also increase the solid waste load on septic tanks and may require that the tank be pumped more often.

TANK TO DISTRIBUTION BOX - How to Find The Septic Blockage

The same failures can occur on the effluent distribution pipe line from the septic tank outlet in to the distribution box as we described earlier on piping from house to the septic tank. Pipes can settle (especially in new construction), break, become blocked or clogged, or become invaded and blocked by tree roots or soils.

How to Determine Where a Septic Blockage Is Located

How would we distinguish among blockages at different points in these distribution lines?

• Blocked pipe between house and tank: discover by snaking the line from house to tank or by observing a backup in the house and, on opening the septic tank access cover, observe poor or no flow into the tank when water is running in the building drains.
• Blocked pipe between tank and D-box: discover by opening the tank and seeing that it is not draining out when water is being run into it from the building drains, and by opening the D-box to observe poor flow or flow into the D-Box when the tank is backing up.
• Blocked leach field lines: discover by excavating at sample points along individual leach lines, often by opening up the line at its lower end. If no effluent is present at the lower end of a leach field line and if effluent is entering that line at the D-Box the line is collapsed or blocked along its passage.
• Failed leach field: effluent is confirmed as flowing freely from building drains to tank, tank to D-Box, and D-Box attempting to flow into the leach lines - perhaps both backing up in the D-Box (see flood lines above the D-Box outlets) and also flowing out at the excavated ends of the leach lines.

D-BOX FAILURES - What Goes Wrong at the Septic System Distribution Box

Distribution boxes serve as a connection point to distribute effluent which arrives from the septic tank outlet and is to be sent into two or more individual leach field lines. Distribution boxes ("D-Boxes") can settle or tip. A damaged or tipped D-box will fail to divert effluent uniformly among the effluent receiving drainfield lines, causing flooding of one leach line. If you see depressions suggesting that there are four leach lines at the property and the end of just one of them is producing wet soil or surface-breakout of effluent, we'd suspect a tipped D-box. Opening the D-box can also show whether or not effluent is being directed uniformly into each of the leach lines. A tipped D-box can overload one line and cause early failure of the absorption system. If this is happening, flow adjustment end-caps (eccentric holes) can be installed in the distribution box on the inlet end of each of the drain lines, permitting adjustment of effluent delivery into each line, perhaps relieving the problem line and redistributing effluent into the others.

DRAIN FIELD PIPING - Diagnosing Leach Field Failures

In a conventional "drain field" of perforated pipes buried in gravel-filled trenches, a drain line may be invaded by tree roots. This is why experts advise keeping tree and shrub plantings away from drain fields.

Vehicle traffic can also collapse this or any outdoor waste piping, which is why experts advise against ever driving over a drainfield or over any other septic system components.

Drainfield piping is usually constructed of perforated pipe buried in gravel-filled trenches. It receives effluent from the D-box and allows it to percolate or seep into the soil around the trench where added filtering and bacterial treatment occur.

Like the distribution piping discussed above, individual drainfield pipes can become crushed, shifted, or clogged by tree roots or other debris. More general clogging and failures of the leach field are discussed below. A broken or clogged pipe, once it has been located, may be much less costly to repair than a complete leach field replacement, so this possibility needs to be considered during diagnosis of a "failed" septic system.

• Building on the leach field: A leach field can be destroyed by other site "improvements" such as this attempt to install a swimming pool atop the leaching area in the photo shown at left. This mistaken installation involved multiple errors: placing a pool atop the leaching area which prevents proper oxygenation and evaporation, driving over the leach field which risks damaging buried pipes and compacting the soil, and excavating to remove a portion of the absorption system soil to put in the swimming pool. The gray water you see next to the swimming pool in this larger photo was effluent from the failed septic fields.
• Compacted soils: driving over the leach field in any vehicle larger than a child's bicycle is a bad idea. Heavy vehicles may actually crush buried leach field lines, or they may compress the soils around the leach field, either of which leads to failure. Driving on or parking on leach fields will destroy them.
• Paving over the leach field: a leach field cannot function properly if it is paved-over. Some folks may try this as a way to permit parking over the absorption system. But paving prevents both evaporation of effluent (a portion of the effluent disposal method) and it prevents oxygen from reaching the soil, thus inhibiting proper bacterial action needed to treat the effluent.
• Clogged soils: Soil absorption systems stop absorbing. Eventually the soils around the leaching bed trenches become clogged and stop passing effluent. Sending grease and floating solids into the leach field hastens this failure. The biomat which forms below the leaching beds may also become too solid and impacted, stopping soil absorption. In this leach field photo effluent was appearing in the light colored area where the homeowner had begun some exploratory digging in a soggy spot only to see her hole fill up rapidly with effluent.
• In the building drains become sluggish, stop, or back up into the building (unsanitary), or effluent may appear on the property surface when the absorption system can no longer function or where a pipe has become damaged.

Lockwood, in "An Engineer's View of Septic Systems" listed these causes of absorption field failure:

" If the liquid effluent cannot soak into the soil surrounding the leach field, sewage may back up into the system and overflow into the house or puddle on the surface of the ground. There are several possible causes for this problem."

1. Poor Soil Conditions: Faulty Design or Installation of Septic Systems A leaching system placed in unsuitable soil, a system that is too small for the house it serves, or an improperly constructed system may lead to early failure.
2. Soil Clogging and Septic Systems: If sludge or scum is allowed to escape into the distribution box and from there into the leach field, the soil will quickly become clogged. If this happens, the liquid will no longer soak, or percolate, into the soil. This condition can be caused by broken baffles in the septic tank that allow sludge or scum to escape. Failure to have the tank pumped can also lead to a situation where the sludge and scum overwhelm the baffles. If a steel septic tank has rusted out and collapsed you should assume that before the collapse it was releasing solids and grease into the absorption system, reducing its life.
3. High Water Table and Septic Systems: During wet, or abnormally wet, seasons groundwater may rise into the leach field and force sewage upward to the ground surface. This condition may mean the system has to be re-installed at a higher level. It may also be possible to intercept the high groundwater with a series of drains around the system called "curtain drains".
4. Roots and Clogging of Septic Systems: The roots of trees and bushes planted too close to the system can sometimes enter and block the pipes of the system. Removal of the plants and clearing the pipes of the roots is usually required.
5. Physical Damage to Septic System Components: Trucks or heavy equipment passing over the system can damage pipes and joints to the point of rendering the system inoperable. You should be aware of the location of the system and direct traffic to avoid such damage.

More Reading:
Diagnosing Clogged Drains: A First Step for Homeowners
Don't Flush these things into a septic system
Tank Location - How to Find the Septic Tank, how deep will the cover be, how to document its location
Diagnosing Clogged Drains: A First Step for Homeowners
What Goes Wrong with Septic Systems? in the Home Buyer's Detailed Guide to Septic Systems - Buying a Home With a Septic Tank
Why Septic Systems Fail in "What is a Septic System - an Engineer's View"

The Septic Systems Online Book - Where Are We?

• This Chapter: FAILURE CAUSES
• Next Chapter: INSPECTING TANKS
• First Chapter: SEPTIC SYSTEMS ONLINE BOOK

More expert information on this topic

More Information on Septic System Diagnosis, Maintenance, & Repair

• The Septic System Information Website home page for this topic
• Septic Systems Inspection, Testing, & Maintenance- online textbook. Detailed how to inspect, maintain, repair information
• The Home Buyer's Guide to Septic Systems
• Septic Tank Pumping Guide: When, Why, How to pump the septic tank
• Tank Location - How to Find the Septic Tank, how deep will the cover be, how to document its location
• Home & Outdoor Living Water Requirements
• Septic Tank Capacity vs Usage in Daily Gallons of Wastewater Flow, calculating required septic tank size, calculating septic tank volume from size measurements
• How Big Should the Leach Field Be? - table of soil percolation rate vs. field size
• Septic System Drainfield Absorption System Biomat Formation - what leads to drain field clogging and expensive drainfield repairs
• Table of Required Septic & Well Clearances: Distances Between Septic System & Wells, Streams, Trees, etc.

InspectAPedia ^TM Home & Site Map - Building Inspection, Diagnosis, & Repair, Environmental Inspection & Testing - Research Website

Home Inspection Construction Consulting Services & advice for home buyers

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search This Website - InspectAPedia.com