InspectAPedia ^TM

Diagnosing Clogged Drains & Septic System Backups: Is it a blocked drain or the septic system? - A First Step for Homeowners SepticAPedia © Enter your search terms Submit search form   Search This Website - InspectAPedia.com How to Diagnose a Clogged Drain How to Diagnose a Septic System Backup How to Diagnose a Failed Septic System

This website explains how to investigate slow or blocked drains and septic system backups to distinguish between a probable septic system failure versus a probable blocked building drain. When a building drain is clogged or slow, or when there is a septic system backup, it's important to determine where the problem lies, since the repair steps can be quite different and costs can vary widely.

The photo above shows the final repair for a toilet that was backing up - in this case the drain was blocked by a child's underpants. By following the investigative steps we recommend you can determine the difference between a blocked drain and other more extensive plumbing or septic system problems. This document is a chapter of Inspecting, Testing, & Maintaining Residential Septic Systems. Also see Sewer Line Replacement diagnosing a clogged drain leads to drain line replacement - step by step photo-illustrated guide to drain replacement, and The Septic Information Website © Copyright 2008 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use the links at page left to navigate this document or to go to Other Website Topics. Green links at left show where you are in our document & website.

FIRST SIGNS - What are the First Signs of Trouble Indicating Failure of a Septic System?

What should a building owner do if the building drains stop working or there are odors or sewage-suspect wet areas on the property? It is important to distinguish between a simple blocked trap or blocked pipe and a failing septic system. That's because the remedies, as well as the costs, are quite different.

Is it a Plumbing Problem or a Septic System Problem - A First Look

Sewage odors, wet areas on the property, slow fixture drains, gurgling drain noises, or plumbing fixtures which "back up" or overflow back into the building may be the first signs of trouble at a property.

If there are sewage odors or soggy sewage-smelling wet areas at a property, the on-site waste disposal system is likely to be at fault. Even so, without further investigation we don't know yet if the problem is a simple repair such as a broken pipe underground, or a costly failure such as a saturated absorption field.

If building drains are slow or clogged, the problem could be the in-building plumbing drain-waste-vent (DWV) system or there may be a problem with the septic system. Without further investigation we don't know.

Also see
Drain Noises: may indicate defective or clogged plumbing: how to diagnose and cure drain sounds
Sewage Odors in Wet or Cold Weather - Septic Odors or Sewage Odor Diagnosis & Repair Guide for diagnosing and eliminating cold weather sewer gas odors
and for sewer or septic backups, see SEPTIC BACKUP PREVENTION and SEPTIC BACKUP REPAIR

DRAIN vs SEPTIC - Is the problem indoor plumbing or the septic system?

A simple initial step must be taken to distinguish between an in-building plumbing problem and an (outside) on-site waste disposal system problem. Simply put, if a single building fixture is sluggish or clogged, but if other building fixtures drain properly, you should suspect a local clog or vent problem at the individual fixture. If all building drains are slow or clogged, or if waste is backing up into the building from the lowest plumbing fixture, you would suspect the onsite waste disposal system.

BLOCKED DRAIN? - Is the problem a blocked drain or pipe or the whole septic system?

Here are the steps to take, in order, to deal with a clogged or slow drain. In the process we'll discover if the problem is only a blocked pipe or if the septic system is at fault. Before digging up the septic system be sure to go through these steps - it may save you some money.

1. Check several building fixtures: Refining the above procedure, if the main building drain is clogged, or if the on-site waste disposal system is blocked, fixtures on upper floors in a building may appear to drain normally, while fixtures on lower floors or at the lowest level in the building may not drain at all, or may even overflow back into the building when upper floor fixtures are operated.
   
   
2. Call a plumber to clean individual fixture drain: A reasonable approach at this point is to call a plumber specializing in drain cleaning. By opening and attempting to clean the building drain or fixture drains, an experienced plumber can determine if the problem is with the building DWV system (drain waste vent) or if it's an outside problem.
   
   
3. Check the house drain-vent system: if there is not an obvious drain blockage, and if drains are slow, particularly if you hear a "gurgling" sound at fixtures during draining, I'd suspect that the building vent system is incomplete, improperly installed, or has become blocked (perhaps by an animal or an insect nest, or in northern climates, by snow if the above-roof extension is too short, or by ice if the vent is too small in diameter - rising steam condenses and freezes in the outside portion of the vent). If the drain problems occur only in freezing weather or when there is heavy snow, I'd suspect these latter defects. If you hear a gurgling at the sink when the toilet is flushed this might be the case. Have a plumber inspect and test the vent system. Blocked vents do not usually cause drain backup but they will cause slow draining.
   Also see Drain Noises: may indicate defective or clogged plumbing: how to diagnose and cure drain sounds, and
   Sewage Odors in Wet or Cold Weather - Septic Odors or Sewage Odor Diagnosis & Repair Guide for diagnosing and eliminating cold weather sewer gas odors.
   
   
4. If the in-building DWV piping is not blocked, and if the drain line between the building and septic tank (or equivalent component such as a cesspool) is not blocked, and if in-building drains are slow or blocked, the problem is most-likely in the on-site waste disposal system.
   
   
5. Even if the problem appears to be "outside" of the building, you still have not determined whether the problem there is a blocked or damaged drain line or a more extensive failure of the onsite waste disposal system. This is a very important distinction. Un-clogging a drain line, or excavating and repairing a crushed or broken drain line outside the building is typically a much less costly repair than replacement of a septic tank, drain field, or seepage system.
   
   
6. If the problem is in the on-site waste disposal system, additional inspection and testing are needed to determine the nature of the failure. Again, a blocked drain line exiting a septic tank, or a failure in the distribution box (connecting the septic tank to the network of drainfield lines, seepage pits or galleys) the repair needed may be local and modest in expense.
   
   
7. Snake (clean) the building drain between house and septic tank: this will check for obstructions, roots, and collapse in the line between house and tank and will also, if you don't already know, determine the probable distance from the house to the septic tank. If you're seeing recurrent blockages in a buried waste line, I'd suspect that it may be improperly sloped, or that the pipe may have been partly broken by vehicle traffic, or that it's partly blocked by a tree root or debris. An experienced drain cleaning professional can often tell by the "feel" of the plumbing snake just what kind of obstruction has been encountered.
   
   
8. Open and inspect the septic tank: if the intake or outlet drains from the tank are blocked because of floating scum or high sludge in the tank, the tank needs to be cleaned. Call a septic tank pumping company. But beware: if scum or sludge levels in the tank were excessive, you've been pushing solids into the absorption system and you may have reduced the remaining life of that component. If the baffles are damaged they should be replaced.
   
   
9. Find and inspect the distribution box: if the tank is clear and its inlet and outlet not blocked, and if drains are backing up in the house I'd expect the liquid level in the tank to be abnormally high and I'd be looking for a blockage in the absorption system, or a soil absorption system failure. The distribution box (or boxes) connect the tank outlet to multiple leach lines, seepage pits, or other soil absorption system(s) (if more than one is present). Look in the D-box. If the box has been flooding and all of the outlets from it are equally distributing effluent, the absorption system is blocked or in failure. But if the box is tipped or otherwise misadjusted so that effluent is not being distributed evenly across the absorption system sub components, that defect should be corrected. However I would not expect a tipped D-box to lead to drain backup in the building.
   
   
10. Inspect the absorption field: if the field is wet or smelly I'd suspect an absorption field failure. If the absorption fields are properly installed there is adequate clearance, typically 4.5 ft. between the bottom of the field and the top of the seasonal (spring) high water table on the property. Otherwise in wet weather conditions your field is flooded, cannot readily accept effluent from the tank, and worse, you're also contaminating the local groundwater with pathogens from the septic tank. If your absorption field is on a slope and is subject to high levels of surface or subsurface runoff, you may need to install an intercept drain or curtain drain up-slope from the absorption field. Keep the intercept drain at least 10 meters from the absorption field perimeter. If the field is flooded and you do not have problems with surface runoff, subsurface runoff, or high water table, before you assume that the field is at the end of its life, check for constantly running plumbing fixtures such as running toilets or a water softener which is stuck in its "backwash" cycle.

If exploration of the on-site waste disposal system piping from house to tank, tank to distribution box, and distribution box to drainfield indicates that the failure is in the drainfield (or absorption system), a more extensive system repair is needed and significant costs are likely to be incurred.

More Reading: (In order of increasing detailed explanation)
What Goes Wrong with Septic Systems? in the Home Buyer's Detailed Guide to Septic Systems - Buying a Home With a Septic Tank
SEPTIC FAILIURE CAUSES in our Online Septic Book - Details Address: How Does Each Septic System Component Fail? - What to Look For During a Septic Inspection - Step by Step Diagnosis
Don't Flush these things into a septic system

Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

More expert information on this topic

More Information on Building Diagnostic Inspections and Repairs: Septic System Maintenance, Plumbing Drain System Diagnosis & Repairs

• Drain Noises: may indicate defective or clogged plumbing: how to diagnose and cure drain sounds
• Sewage Odors in Wet or Cold Weather - Septic Odors or Sewage Odor Diagnosis & Repair Guide for diagnosing and eliminating cold weather sewer gas odors
• Sewer Line Replacement diagnosing a clogged drain leads to drain line replacement - step by step photo-illustrated guide to drain replacement
• Swimming Pool Clearance distance to septic components
• SEPTIC SYSTEMS HOME The Septic Systems Information Website
• SEPTIC INFO ARTICLES critical "how to" articles on dealing with septic system maintenance and diagnosis
• HOME BUYERSGUIDE to septic systems
• SEPTIC SYSTEMS ONLINE BOOK a detailed text on the inspection, diagnosis, repair, and installation of septic systems

InspectAPedia ^TM Home & Site Map - Building Inspection, Diagnosis, & Repair, Environmental Inspection & Testing - Research Website

The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems

Home Inspection Construction Consulting Services & advice for home buyers

Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab

Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search This Website - InspectAPedia.com