InspectAPedia ^TM

MOLD INFORMATION CENTER
ALLERGEN TESTS for BUILDINGS
DO-IT-YOURSELF WARNINGS
FLOODS & MOLD CLEAN/PREVENT
MOLD ACTION GUIDE - WHAT TO DO
MOLD DETECTION & INSPECTION
HOW TO LOOK FOR MOLD
  CHOOSE SAMPLE POINT
  SAMPLING DRYWALL
  SAMPLING MISTAKES
  USE A FLASHLIGHT
WHAT MOLD LOOKS LIKE
  Black Mold
  Brown Mold
  Green Mold
  Red Mold
  Yellow Mold
  White Mold
  Invisible Mold
  Recognize Cosmetic Mold
  Recognize Harmless Black Mold
ATTIC MOLD
BASEMENT MOLD
CARPET TEST GUIDE
CRAWLSPACE MOLD
HIDDEN MOLD, HOW TO FIND
  Photo Guide to Finding Hidden Mold
  Hidden Mold Behind Paneling
  Spotting Hard-to-See Mold
  Use of a flashlight to find mold
  Wall test cuts to spot hidden mold
  Light colored toxic molds
  Moisture Gradients and Mold
  Other Places to Look for Hidden Mold
INSULATION MOLD
ITCHY FABRICS
MOLD BY MICROSCOPE
MOLD ON DIRT FLOORS
MOLDY CARPETS
PHOTO GUIDE TO STAINS on Indoor Surfaces
STUFF THAT IS NOT MOLD
USING LIGHT TO FIND MOLD

More Information
  Allergens:
  How to Look For Mold
  Mold Test Kits

InspectAPedia ^TM Home & Site Map
Air Conditioning
InspectAPedia Bookstore
Electrical
Environment
Exteriors
Heating
Home Inspection
Insulate Ventilate
Interiors
Mold Inspect/Test
Plumbing
Water
Septic
Roofing
Structure
Accuracy & Bias Pledge
Contact Us
Website en espanol
Website en Francais
Website en Portugese

How to Find Hidden Mold Reservoirs in the Home - a guide detection of mold allergens Where might we look for "invisible" or "hidden" mold reservoirs in buildings? MoldAPedia © Enter your search terms Submit search form   Search This Website - InspectAPedia.com

Where & How to Look When You Cannot Find the Mold Problem in a Building How to Find & Test For "Invisible" Mold in Buildings Links to Photographs of black mold & other molds of various colors and textures in buildings Photographs of mold on or behind wallpaper Links to photos of stuff that is not mold or is harmless mold

Our site offers impartial, unbiased advice without conflicts of interest. We will block advertisements which we discover or readers inform us are associated with bad business practices, false-advertising, or junk science. Our contact info is at inspect-ny.com/appointment.htm.

What do we do when we cannot find a mold problem but we think there is problem mold in a building. Suppose an "air test" says there is problem mold indoors but you don't see where the "problem mold" is coming from? Where and How do we look for hidden mold? Also see Mold Related Illness: Index of Symptoms and for an atlas of building molds and for more microphotographs of building mold samples observed in our laboratory, see Mold Atlas of Indoor Clinical Mold, Pathogens, Allergens & Other Indoor Particles. © Copyright 2008 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use the links at page left to navigate this document or to go to Other Website Topics. Green links at left show where you are in our document & website.

Where to Look When You Cannot Find the Mold Problem in a Building

Where to look for "Invisible Mold" in Buildings - important mold reservoirs that cannot be detected by visual inspection

Results of a small test cut to check for hidden mold

Of course some important problematic mold reservoirs may be hidden inside building cavities where you won't see them without making a test cut in just the right place. We find these problems by inspecting "by context", that is, we decide where to make an invasive test cut by studying where leak or moisture problems have been or are likely to have been on a building.

This photo shows the hidden interior side of drywall on the test cut we made using the hole saw shown at the top of this page. The red material was a yeast which accompanied toxic mold which we confirmed was present in this wall cavity.

What's important is the development of a strategy for just where to make such test cuts to look for hidden mold. Random test cuts to screen a building for mold are unreliable.

Some other critical indoor mold problems may be on an exposed building surface or material, but the mold may be totally invisible to the naked eye. Such "hidden in plain sight mold" can be detected by a combination of common sense in recognizing mold-friendly materials and mold-producing conditions.

Exposed insulation may be mold contaminated

For example, fiberglass insulation in the ceiling over a flooded basement or crawl space is highly suspect. In some cases it's more economical and sensible to simply replace suspect material than to spend on testing it for mold contamination.

But where large areas or large expense would be involved, special testing methods can determine whether insulation or other mold reservoir materials are indeed mold-contaminated. We use a combination of vacuum pump and sampling cassettes to examine suspect building insulation.

Here is a photo taken in our laboratory when we examined our sample of insulation which we suspected would be mold-contaminated. You can see extensive mold contamination of at least two types, Penicillium/Aspergillus spores and spore chains and darker fungal spores which are probably a species of Cladosporium sp. This insulation looked "clean" to the naked eye, but by context we suspected it would be a problem reservoir of mold. Moldy fiberglass insulation is often missed by casual or inexperienced mold inspectors. The presence of spore chains confirms that we had active mold growth nearby if not in the insulation itself.

Making a larger wall test cut to check for hidden mold Here we made a larger test cut in mold-suspect drywall because we saw a leak stain on the exposed surface. Even though there was no mold on the exposed side of this wall, the water stain led us via this test cut to discover a leaky drain pipe that was previously unknown. We would not make a cut like this unless there was external evidence of probable leakage into this cavity; a borescope might have found this problem too, though views through such instruments are quite limited and do not permit full examination of all materials and surfaces. Notice the evidence of mouse activity at the right end of this test cut?

Removing Wallpaper to Check for Hidden Mold In our daughter's condominium we peeled down clean-looking wallpaper because we saw evidence of a history of leaks into the wall cavity at the window sill. Even though there was no mold on the exposed side of this wallpaper, the water stains led us via this test to discover an area of Stachybotrys chartarum that was worth removing. We often find mold growth behind wallpaper where there has been leakage or high moisture, including wallpapers used in bathrooms. Beware: some antique wallpapers which may be attacked by mold growth can cause the release of poisonous arsenic into the local environment.

Hidden Mold Under Furniture Drawers or Built-in Drawers Simply pulling out a drawer may reveal problem mold growth. In this case we found this by pulling out the bottom draw of a built-in storage chest in a bathroom in an older home. We've also found Aspergillus sp. colonies growing on the un-finished underside of furniture and game tables.

Hidden Mold Behind Wall Paneling We pulled down this bathroom paneling even though it's exposed side looked very clean, because other clues indicated that there had been a history of floor flooding in this area.

Hidden Black Toxic Mold Behind Drywall

We made the test cut you see in the photo at left above, even though the architect had directed the mold inspection and testing to be performed in a completely different building area. That's because we saw water-damaged flooring and because occupants of this area were complaining of severe respiratory and eye irritation. We had to push insulation aside to show the black mold just visible in this photo on the cavity side of the opposing drywall. Our lab test indicated that we'd found Memnoniella echinata (a very close relative of Stachybotrys chartarum) which we find quite irritating.

The second photograph above shows how extensive the mold growth was when the lower wall cavity was cut away. This mold contamination had spread on 100 linear feet of wall in this area due to an air conditioning leak which drained into the channel formed by the steel u-channel used as a sill plate for this steel-stud wall.

Be sure to review our mold-detection guides & articles on where and how to look for hidden mold problems in buildings:

• HIDDEN MOLD, HOW TO FIND
• INSULATION MOLD a photo tour of other places to look for hard-to-spot mold
• Mold in fiberglass insulation in crawl spaces
• FIberglass in Indoor Air, HVAC ducts, and Building Insulation
• USING LIGHT TO FIND MOLD
• HOW TO LOOK FOR MOLD.

More Reading and photos to assist people looking for mold contamination in buildings:
WHAT MOLD LOOKS LIKE
MOLD IN HOMES
  Black Mold
  Brown Mold
  Green Mold
  Red Mold
  Yellow Mold
  White Mold
  Invisible Mold
USING LIGHT TO FIND MOLD
MOLD BY MICROSCOPE
PHOTO GUIDE TO STAINS on Indoor Surfaces
CARPET TEST GUIDE
STUFF THAT IS NOT MOLD

HOW TO LOOK FOR MOLD
WHAT MOLD LOOKS LIKE
ATTIC MOLD what attic mold looks like, where to look
BASEMENT MOLD what basement mold looks like, where to look
CRAWLSPACE MOLD what crawl space mold looks like, where to look
MOLD ON DIRT FLOORS
MOLDY CARPETS how to look for mold under and on carpeting
HIDDEN MOLD, HOW TO FIND
INSULATION MOLD photo tour of other places to look for hard-to-spot mold
DO-IT-YOURSELF WARNINGS for mold investigators and homeowners

Use the specific article links above or on any of our web pages use the links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

More expert information on this topic

More Information on Finding and Identifying Mold in Buildings and Building Diagnostic Inspections and Repairs

• Looking for Mold Procedure: what mold is often found where in buildings - simple technical presentation
• How to Look For Mold, List of Articles: Hiring a Mold or IAQ Consultant, Getting a Remediation Plan
• Mold spores in the Home - a Photo ID Library for detection and identification of mold allergens
• Recognizing Allergens: What various indoor allergens look like - identification photos to help identify pollen, dust mites, animal dander, toxic or allergenic mold - Common Mold and other Allergens, Irritants, Remedies & Advice
• Stuff that is not mold but is often mistaken for it - things you may not want to test. Also, not all "black mold" is toxic - here are examples of harmless black mold.
• Allergens: what they look like in buildings
• Animal Allergens: Dog, Cat, and Other Animal Dander - Cleanup & Prevention Information for Asthmatics and regarding Indoor Air Quality.
• Mold in Fiberglass Insulation© 2005 comments about a field study in process, & more about health hazards from fiberglass insulation - DJF
• Mold Investigation Tips for Home Inspectors how to find mold, where to look, what is likely to be important. Advice to building inspectors intending to inspect or test for toxic or problematic mold indoors, mold inspection methods, and mold test methods which are valid or invalid
• Mold Test Kits - How to Collect and Send Your Own Mold Sample to our mold testing lab
• Meruliporia: the house eating fungus or "poria"
• Mold Central: indoor air quality investigation case histories, key links what to do about mold and indoor allergens - our Fear of Mold "Mycophobia" WebLog-Blog.
• Ozone Warnings - Use of Ozone as a "mold" remedy is ineffective and may be dangerous.
• Rot concerns in buildings-some building mold such as Meruliporia incrassata "Poria" risks serious rot and hidden structural damage
• Frequently Asked Questions About Mold -- check this FAQ list & IAQ Site Map to see if you can find a quick answer to your mold concern

The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems

Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab

Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.

InspectAPedia ^TM Home & Site Map - Building Inspection, Diagnosis, & Repair, Environmental Inspection & Testing - Research Website

Home Inspection Construction Consulting Services & advice for home buyers

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search This Website - InspectAPedia.com