InspectAPedia ^®

Municipal Water Test Parameters
WaterAPedia ^©

	Enter your search terms Submit search form
	Search This Website - InspectAPedia.com

• Municipal Water Test Parameters
• Should you order private testing for municipal water in your home
• Water test choices & alternatives
• Costs & of various water tests

What drinking water contamination tests should you order? Here we discuss the water contaminants covered in a municipal water supply testing.

Readers should also see our longer article Water Quality Testing, and advice for home buyers and building owners: water contaminants, water test procedures, well shock procedures, preventing drinking water contamination, and Cheating on water tests in that document. © 2008 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

Municipal- water test parameters - how to check for pesticide contaminants in drinking water

Normally I would not test water in a property served by a municipal supply, as federal, state, or other regulations require thorough and frequent testing that is more extensive than a private individual is likely to employ.

However for small water systems such as those serving a limited number of homes, and particularly where the water supply system is being privately managed by a local firm or by a local property manager, some screening tests may be appropriate. This would be particularly true if a review of the history of local testing and water sanitation by the local provider raises questions about the accuracy and thoroughness of the water management company.

The water test parameters listed below are typical state testing requirements for municipal water supply testing. Be sure to review actual parameters with your home inspector or laboratory: parameters and costs vary. More in-depth, un-biased, expert information on these topics and on building defect inspection, diagnosis, & repair can be found at "More Information" below. © 2008 Daniel Friedman, All Rights Reserved

Contents - More Water Testing & Building Inspection/Test Information Sources

Use links at the left of each page to navigate this document or to view other topics at this website. Green links at page left show where you are in our document or website.

More Information on Testing and Correcting Unsanitary Drinking Water & Building Diagnostic Inspections and Repairs

• Drinking Water testing, contamination, correction - all topics
• Drinking Water Testing Advice for home buyers home owners home inspectors
• Choices of Water Tests & Fees: A Summary of Types of Water Tests, Degrees of Comprehensive Water Testing, Details of Water Test Parameters
• Cheating on water tests: Testing Water for Real Estate Transactions - make sure your water test is valid
• General water testing and corrective measure advice: contact your local health department.
• Interpreting Drinking Water Test Results and Correcting Unsatisfactory Water
• Drinking Water Contaminant Levels - Maximum Allowed
• Drinking Water Contamination and Pollution How to Detect, Test, Correct, and Prevent Well Water Contamination - US EPA - Groundwater
• How to Reduce Lead Contamination in Drinking Water: how to test & correction lead in drinking water
• When and How to Shock or Chlorinate a Well - Procedure for Shocking a Well to (temporarily or maybe longer) "Correct" Bacterial Contamination
• Water and Waste Water Test Methods, US EPA
• Water Requirements, Home & Outdoor Living
• ATSDR: Nitrate/Nitrite Toxicity [Big, Slow-Loading File] U.S. Government ATSDR Science Corner - 2.5MB PDF
• Water Supply & Drain Piping, Wells, Pumps, Water Supply Equipmentt
• The Septic System Information Website - Extensive, Detailed Consumer and Industry Information on Septic System Inspection, Testing, Maintenance, Alternatives for on-site waste disposal
• Sewage or Septic contamination in buildings - Investigation, Testing and Remediation

InspectAPedia® Home & Site Map - Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice: In-depth research & advice on diagnosing, testing, correcting, & preventing building defects & indoor environmental hazards. Unbiased information, no conflicts of interest.

The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems

Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab

Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.

Building Inspection, Problem Diagnosis, Forensic Investigation & Testing, Repair Consulting

Contact Daniel Friedman for website content suggestions or for fee-paid consulting

	Enter your search termsSubmit search form
	Search InspectAPedia.com